Call Us: +91 9496096010

Send Us: info@amcospaints.com

 

AMCOS PAINTS ACRYLIC WALL PUTTY

Category:
Description

AMCOS PAINTS ACRYLIC WALL PUTTY

About

AMCOS PAINTS ACRYLIC WALL PUTTY is a water based putty for interior surfaces, which gives a strong and smooth finish. It is designed to achieve excellent filling and leveling of the surface imperfections and better sanding. The acrylic part associated with this formulation ensures great smoothness, better coverage and finish to the top coat.

Directions Of use

Apply one coat of AMCOS PAINTS PLASTER SEALER or AMCOS PAINTS WALL PRIMER INTERIOR and allow to dry. Apply AMCOS PAINTS ACRYLIC WALL PUTTY as such using a putty knife. Dilute AMCOS PAINTS ACRYLIC WALL PUTTY with water if required. Allow to dry for 6-8 hours. Apply second coat of AMCOS PAINTS ACRYLIC WALL PUTTY if required. Allow to dry for 6-8 hours. Sand the applied surface using sand paper/emery paper and wipe clean. Apply one coat of AMCOS PAINTS PLASTER SEALER or AMCOS PAINTS WALL PRIMER INTERIOR and allow to dry. Apply 2-3 coats of the desired AMCOS PAINTS finish coat.

Features

Good adhesion

Good bonding with topcoats

Good filling properties

Good workability

Excellent smooth finish

Packing

Colour

Recommended application method

Surfaces Preperation

Surface should be completely cured and free from dust, grease or loose particles. Any algal fungal growth should be properly removed and cleaned with bio wash to prevent the growth. Cracks should be properly sealed (Hairline cracks using AMCOS MASTER SEAL, cracks up to 2 mm using AMCOS SEAL AND FILL and cracks above 2 mm should be addressed by civil maintenance work.

Technical Data

Dilution : with clean and fresh water if required
Coverage : 10-15 sq.ft./kg/coat
Surface dry : 25 minutes
Hard dry : 6 hoursRecoating
interval : 8 hours

Safety

  • Wear masks, gloves, safety goggles and protective clothing while handling and application of paint.
  • Keep out of reach of children and away from eatables.
  • Store paints away from direct sunlight, heat open fire and water
  • Do not pour the leftover paints in drains. Dispose off the paint left overs and containers as per local regulations.
  • Splashes on skin should be cleaned with a suitable solvent, washed off with soap and water
  • ln case of any accidental ingestion or contact with eye, seek immediate medical attention
  • Lead content does not exceed 90 ppm.

Disclaimer: The information contained with this datasheet is based on our laboratory and practical experiments and we may change these with out notice. As the products are often used under conditions beyond our control, we do not take responsibility and liability for anything other than the quality of the product itself.

Related products