Call Us: +91 9496096010

Send Us: info@amcospaints.com

 

AMCOS AM-POXY

Category:
Description

 AMCOS AM-POXY

About

AMCOS AM-POXY is a single pack user friendly high performance epoxy coating. The innovative and modified formulation of AMCOS AM-POXY enhances the performance and protect the substrate in adverse climatic conditions thus providing extremely durable surface

Directions Of use

Mix well AMCOS AMPOXY with Amcos Thinner 110P in recommended dilution ratio. Apply first coat and allow to dry for 4-6 hours. After complete drying, apply second coat of AMPOXY and allow to dry

Features

Single pack

User friendly

Quick drying

Good acid and alkali resistance

Good for OEM applications

Good for marine atmosphere

Packing

Colour

Recommended application method

Surfaces Preperation

Ensure that the surface is prepared well before starting the application. The surface should be completely free from moisture, dust, oil, grease and other contaminants.
For metal surface, clean the surface to bare metal by sanding/chipping/wire brushing. For repainting structures, loose paint should be removed, thoroughly abraded and roughened by sanding/ wire brushing.
For cementitious surfaces, all cracks should be properly filled and free from contaminants. Any algal fungal growth should be removed and cleaned with bio wash to prevent the growth

Technical Data

Dilution : 10-15 % by volume with Amcos Thinner 110
PCoverage : 160-180 sq.ft./ltr/coat
Surface dry : 45 minutesHard dry : 6 hours
Recoating interval : 12 hours
Gloss level : Semi gloss
Flash point : Not below 30°c
Flammability : Flammabl

Safety

  • Wear masks, gloves, safety goggles and protective clothing while handling and application of paint.
  • Keep out of reach of children and away from eatables.
  •  Store paints away from direct sunlight, heat open fire and water.
  •  Do not pour the leftover paints in drains. Dispose off the paint left overs and containers as per local regulations.
  •  Splashes on skin should be cleaned with a suitable solvent, washed off with soap and water.
  •  ln case of any accidental ingestion or contact with eye, seek immediate medical attention.
  •  Lead content does not exceed 90 ppm.
  •  Flammable

Disclaimer: The information contained with this datasheet is based on our laboratory and practical expiriments and we may change these with out notice. As the products are often used under conditions beyond our control, we do not take responsibility and liability for anything other than the quality of the product itself.

How To Use?

Wipe away grease, oil etc. completely from the surface and make it clean before applying Amcos Am-Poxy.

If the surface is smooth, use Emery paper to rub and make it rough so as to make it more adhesive.

Use Amcos Thinner 110P (10% - !5%) to dilute Amcos Am-poxy according to the usage and quantity needed. Be careful while diluting, as the imperfect proportion of dilution may affect durability and opacity.

Two coat painting is recommended. There must be an interval of at least 6 hrs between two coats of painting.

Available in 500 ml, 1 Liter & 4 Liter Tins.

Grey, Silver grey, black colors etc. could be used as both Finish coat & Primer Coat. Red & Sink Phosphate (white & yellow) should only be used as Primer coat.

Points to Note

  • Mix well before use.
  • It is advisable to strain before application.
  •  Actual coverage may vary depending upon the method and conditions of application, surface conditions, application skill, surface roughness and porosity, selected shades etc.
  •  Darker shades may require an additional coat for complete coverage.
  •  Recoat period is quoted for 25°C and 50% relative humidity, these may vary under different conditions.
  •  It is advisable to check and maintain the diluted paints consistency in certain intervals based on atmospheric conditions to avoid application issues such as poor finish and less coverage due to solvent evaporation.
  •  Actual paint shade may slightly vary from printed shade card.
  •  The paint film required at least one week time for complete curing under normal atmospheric conditions.
  •  Keep the container tightly closed after opening to prevent drying.
  •  For repainting, always check the adhesion and compatibility on a small area.
  •  As all epoxy coatings tend to chalk in highly exposed exterior surfaces, it is strongly recommended to have a good quality top coat for long lasting protection

Amcos Am-Poxy

ANTI - CORROSIVE EPOXY COATING

The single pack Am-Poxy coating, Amcos Am-Poxy performs as a protective shield for Iron and also assures strength & quality. Amcos Am-Poxy is the best anti – Corrosive Epoxy coating that suits to our climate that almost retain moisture content in the atmosphere. Simple and easiness in the usage makes Amcos Am-Poxy unique as it is available in single pack.

Related products